J Wiebe & Associates >> Northstar Performance International   

New Online Store! Click Here

   Main Index    


    SureGrip Stud Kits
    MLS Head Gaskets
    Main Stud Kits
    The Bulletproof Kit
    Engine Mounts
    E/K Body Engine Mounts
    Camshafts (replacement)
    Gaskets & Seals
    PCMs / ECMs / ECUs
    Flywheel Bolts
    Gasket Sets
    Intake Manifolds
    Bearing Kits - Crank & Rod
    New Crate Engines

Is your Cadillac or Northstar Engine Overheating?

So your Northstar powered car overheated, or it's blowing white smoke. It may be losing coolant and you can't explain where it's going. There are three ways the head gaskets can fail on a Northstar. 1- exhaust gases blow into the cooling system under load, such as when you climb a hill or pass someone. 2-coolant gets into the cylinders and you leave a trail of white smoke behind you. 3- coolant gets in your oil or vice-versa. A blown head gasket doesn't mean your car is toast- Cadillacs and Oldsmobile Auroras truly are performance vehicles that love to be driven. Don't give up on your car yet.

I've been told it's probably head gaskets. Could this be true?

Of course, you won't want to have the head gaskets replaced if it's not necessary. Many people don't get straight answers when it comes to head gasket diagnosis, especially when it comes to Northstars. While we strongly recommend having this work done if your car is a 2003 model year and older, as preventative maintenance, it may not be necessary quite yet.

Here are the most common signs of head gasket failure on a Northstar:

    - Overheating
    - High pressure build-up in the coolant surge (fill) tank, that remains when the engine cools off
    - White smoke from the exhaust (condensation/water vapor is completely normal for any car)
    - Coolant smell from the exhaust
    - Engine temperature spikes during acceleration or climbing steep grades
    - Coolant in the oil (this will turn the oil a milky white or light brown)
    - Sudden severe oil leak coming from rear main seal area

One good test: make sure you have adequate coolant, and get the car on the highway and do a few quick acceleration runs. Get the car quickly up to 70 MPH (120km/h) and slow back down to around 30 MPH (50km/h). Only do this where it is legal! Repeat this process, monitoring coolant temperature. If you have the guage, the temperature should never normally run past the 5/8 mark. If you have the digital read-out, the temp should never hit the 240 degree F mark. If the temp keeps climbing to the point where it tells you "A/C off for engine protection" or "Engine hot - idle engine", or your guage passes the 3/4 mark, pull over immediately, let the car idle for a minute and shut it off. Let it cool down a bit, top off your coolant and make your way back home. At this point, keep your foot out of the gas as much as possible. Your head gaskets are blown / head bolts pulled.

The best test: get a "combustion leak test kit" available from Napa or Autozone. It will check for exhaust gasses being present in the cooling system. This test never fails.

Many repair shops are capable of diagnosing a bad head gasket but not all of them know how to deal with the Northstar. Did you know a Northstar can pass all the usual pressure tests, and still have a bad head gasket? This is due to the troublesome head bolts. This is why we recommend the method above for determining the state of your gaskets.

So what to do now? Well, for starters, DON'T use any type of quick-fix in a bottle. I'm sure you've read about miracle sealants that are designed for the Northstar and a bunch of other stuff on the market. All this will do is clog up the coolant passages. The guy who does your head gaskets won't appreciate the mess that will need to be cleaned out once he tears your engine down, and you won't like replacing your radiator and heater core. Of course it is never a bad idea replacing your water pump, checking the belt and tensioner, cooling fan operation (they do fail sometimes) and if in doubt, a new radiator. But a lot of the time, nothing but the head gaskets will need to be done.

If you have coolant in your oil, stop driving, period. Don't run the car at all. This can severely damage your engine. If you must move the car, make sure the oil is at the proper level and not too high.

If you are seeing moderate to heavy white smoke, don't try to start the car again- get to where you need to go and shut the car off. Especially if you have a 2000 or newer model- the engines are not as strong and have been snapping/bending connecting rods when coolant gets in the cyinders.

If you are getting exhaust gasses in the coolant (pressure in the plastic coolant tank), it is OK to drive the car providing you can keep your speed down to about 50MPH (80km/h) and you keep checking/topping off your coolant. No more sudden acceleration or passing, and stay away from long hills. Just don't overheat the engine. Regardless of what the owner's manual says, it's not OK to continue to drive without coolant- these cars have a limp-mode but it is not very effective. If you have overheated your engine, the oil-life-monitor will return to 0%. You should change your oil after overheating the engine.

If your head gaskets are blown

Find a reputable repair shop to have your Northstar Engine repaired. Start with the people in our repair network; or suggest to your local mechanic to use our PATENTED SureGrip stud kit to fix your engine. Be very careful, there are black market kits out there that infringe on our patent and are not made to proper specifications.

Here's a car that came to us from Minnesota:
It's safe to say it was a bit overdue for repair.

New Products

  • 2000-2003 PCM Tuning
  • E/K Body Engine Mounts
  • 04-05 PCM Tuning
  • Eagle Forged Rods
  • Vinyl Decals
  • Gasket Sets

PCM Tuning - click here!

Engine Mounts - click here!

Stop Patent Infringement - click here!

Vehicles We Specialize In

Buick Lucerne (V8)
Pontiac Bonneville GXP
Oldsmobile Aurora

Information Desk

Contact Us
About Us
Our Mission
Privacy Policy


Subscribe To Our Newsletter!
Our newsletter will give you the inside scoop on all our developments and future specials!

Facebook Youtube Twitter Pintrest Google Plus

Making Northstar Engines Stronger Since 2008!
Email: info@northstarperformance.com | We have installers across the USA and Canada

Copyright 2020 Northstar Performance. All Rights Reserved.
Copying of any design, articles, and artwork from www.northstarperformance.com is strictly prohibitied. Permission may be granted- inquire to legal@northstarperformance.com
Questions concerning the security and privacy of this website? Read our Privacy Policy.